Other important precautions:
● Do not spray the surface of the sensor
directly with high-pressure water such as a
squirt gun, and do not squeeze or impact the
surface of the sensor in any other way.
Otherwise, it may cause malfunction.
● The parking sensor system sensor is a
precision part. Do not disassemble and
repair it without permission. The company
will not bear the quality guarantee for the
damage caused by the user's unauthorized
disassembly, assembly and maintenance.
Backup camera*
Introduction to Backup Camera
This vehicle is equipped with a reverse camera on the
right side of the rear license plate lamp trim strip. By
using this camera, the backup camera captures
images behind the vehicle and transmits them to the
infotainment screen in the cab, so as to assist the
driver to reverse.
During reverse, the driver can clearly see the scene
behind the vehicle through the infotainment screen to
avoid damaging the vehicle. But the system also has
blind spots, such as being unable to detect small
objects under the bumper and objects near the back
and corners of the bumper.
Use of backup camera
When the vehicle is in R position, the rear view
camera starts working and the infotainment screen
will display a real-time backup camera. At the same
time, the backup camera is accompanied by dynamic
and static trajectory line indications. The driver can
determine the distance between ground obstacles and
the vehicle based on the static trajectory line
identification. The static trajectory line represents the
distance as shown in the figure.
When the vehicle exits the R gear, the rearview
camera stops working, and the infotainment screen
returns to the previous interface.
To Next Page
Loading...
