3. Toggle down the cruise control RES+/SET-
button, so that the vehicle will cruise at the current
speed. At this time, the green indicator light of the
cruise control in the instrument cluster will light
up. If the cruise control RES+/SET - button is
toggled up while the speed memory is not cleared,
the last memory speed cruise control will be
restored;
4. Release the accelerator pedal and the vehicle will
enter the cruise control state.
When the cruise control is turned on, toggle the ACC
switch upward to exit the cruise control. At this time,
the green cruise indicator light in the instrument
cluster goes out.
Increase / Decrease Cruising Speed
1. Toggle the cruise control RES+/SET- button
upward to increase the cruise target speed by
2km/h;
2. Press and hold the cruise control RES+/SET-
button upward to increase the target speed by 10
km/h, but not higher than 130 km/h.
To Next Page
Loading...
