● The system may brake with noises when
ACC is working. This phenomenon is
normal, please rest assured.
● ACC system can cause brake during
operation when brake is not needed or when
you do not intend to brake. This may be
caused by the detection of vehicle or objects
in the adjacent lane, especially on curves.
● The ACC function cannot cover all driving
scenarios, traffic, weather and road
conditions. Even if the ACC is in active state,
the driver must drive carefully and obey
traffic rules. The driver must always
maintain control of the vehicle and take full
responsibility for the vehicle.
Turn On/Off ACC
The cruise control mode can be selected by the
infotainment screen: ACC/integrated intelligent
cruise control. Select ACC.
Starting interface:
①
Set the time interval for following the vehicle,
divided into four gears
②
ACC indicator light
In case of standby state, the ACC standby indicator
light (white) will light up; After ACC is activated,
ACC indicator light (green) goes on.
③
Set cruising speed
④
The preceding vehicle is recognized, and the
preceding vehicle is highlighted when ACC is
activated
⑤
Recognized distance from the front vehicle
⑥
Subject vehicle
Automatic emergency braking
Traffic sign identification
Alarm display + alarm sound
Integrated intelligent
cruise control
Forward collision warning
To Next Page
Loading...
