Cleaning of Front Windshield
Wiper Blade
The Cleaning Operation:
1. Turn on the wiper inspection and repair mode
through the infotainment screen.
2. Lift the wiper arm away from the windshield.
3. Only hold the wiper blade holder.
4. Carefully wipe off the dust and dirt on the wiper
blade with a soft cloth.
5. After cleaning, gently replace the wiper arm.
6. Turn off the front wiper inspection and repair
mode.
● Replace the damaged wiper blade in time.
● The new wiper blade is coated with graphite,
which can make the scraping smooth and
avoid scratching noise. Damage to the
graphite layer will increase wiping noise.
The wiper blade should therefore be
promptly replaced if this occurs.
● In winter or cold conditions, be sure to check
whether the wiper blade is frozen with the
windshield before using the wiper. If it is,
clear the ice first. Otherwise, it will damage
the wiper blade and the wiper motor.
Maintenance of Sealing Strip
Proper regular maintenance of the rubber strips on the
vehicle doors and windows can maintain their
flexibility and prolong their service life. It can also
improve their sealing performance, make the vehicle
doors easy to open and reduce the impact sound of
door closing. It also makes it more difficult for the
vehicle doors to freeze.
Maintenance operation:
1. Remove dust and dirt from the sealing strip with
soft cloth.
2. Regularly apply the special protective agent on
the sealing strip.
On both sides of the front top cover are designed
for drainage channel outlet, where there might
be a little ponding after the rain. When the front
door is open, a small amount of ponding may
spray into the vehicle.
Cleaning and Maintenance of
Wheels
Regular maintenance will keep the wheels pleasing to
the eye. It is also necessary to regularly clear anti-skid
salt and braking scraps from the wheels so as to keep
the polish on the surfaces of the wheels and prolong
their service life.
To Next Page
Loading...
