5. Once the oil level is close to the maximum mark,
please stop refueling immediately and install and
tighten the oil filler cap.
● Be sure to carefully read and observe the
relevant warnings before starting work.
● The engine oil is highly flammable. While
adding engine oil, be sure to exercise care. Be
careful to NOT spray engine oil onto any
engine part or the exhaust system.
● The engine oil filler cap must always be in
the tightening state to prevent the engine
from splashing and causing a fire when it is
running.
● Be sure to use the engine oil that is
appropriate for the engine of the vehicle you
purchased.
● If a different specification of engine oil is
used, the engine may be damaged and this
may lead to an accident.
● If the oil level exceeds the maximum mark,
do not start the engine; otherwise, the
catalytic converter and engine may be
damaged.
● Select the engine oil with different viscosity
grades (grades) according to the following
table for different ambient temperatures.
● Use ACEA normal C3 grade or higher
special engine oil for diesel engines. GS Kixx
D1 C3 5W-30 and PAO1 0W-30 are
recommended. For extreme temperatures,
engine should select the appropriate engine
oil according to the outside temperature.
● The engine of the vehicle is filled with high
quality engine oil at the factory and can be
used all year round, except in extreme cold
weather.
● Do not mix engine oil of different grades.
To Next Page
Loading...
