Purchase of new tire
View the tire and loading information label on the
vehicle to get information on the model and
dimension of the tires needed.
Mixed use of tires will make the vehicle run out
of control while driving. If you mix tires of
different dimensions or models (radial tires and
bias-belted tires), it will not be possible to steer
the vehicle normally, thus causing accidents. Use
of tires of different dimensions may damage the
vehicle. Therefore, all wheels must have the
same dimension and model.
Balance of wheels
When the vehicle leaves the factory, the wheel has
been balanced, but there are many factors that will
affect the wheel balance during the vehicle wheel.
Be sure to promptly perform dynamic balance
treatment on imbalanced wheels. Otherwise, it will
cause excessive wear to the steering system, the
suspension system and tires.
After tires are replaced, the wheels must be
dynamically balanced again.
Dynamic balance standard of wheel:
● Unilateral residual unbalance ≤8 g (HT tyre)
● Unilateral residual unbalance ≤10 g (AT tyre)
Inaccurate Wheel Alignment
Wheel alignment misalignment will lead to uneven
tire wear, which will reduce driving safety. If uneven
tire wear is found, the driver shall go to the authorized
dealership of BAIC ORV as soon as possible for
wheel alignment.
To Next Page
Loading...
