● The upper fixing anchor supports are located at
the rear of the rear backrest.
Installation
1. Slightly push up the headrest behind the child
seat.
2. Thread the top tether through the headrest, or
place the top tether on either side of the headrest
depending on the child safety seat, and then pull
the top tether back to the back of the rear seat.
3. Press the ISOFIX child safety seat onto the fixing
ring in front of the seat until you hear the
engagement sound of the child safety seat.
4. Pull both sides of the child safety seat to check if
it is securely installed.
5. Snap the top tether ISOFIX fixing ring and top
tether hook on the back of the rear seat.
6. Tighten the top tether so that the child seat is close
to the rear seat backrest.
● The ISOFIX fixing ring on the back of the
rear seat can only be used with ISOFIX
system.
● Do not attach fastening straps, non ISOFIX
child safety seats, or any other items to the
fixing ring.
● Only one top tether can be connected to the
rear fixing ring on the back of the rear seat,
and any other rope (such as the tether for
securing luggage) must not occupy the fixing
ring.
● The lower fixing point of the child safety seat
for the second row seats of the 7-seater
model requires the decorative cover to be
rotated backwards to the rearmost position
before use.
To Next Page
Loading...
