EasyManua.ls Logo

BAIC BJ60 Series - Page 51

BAIC BJ60 Series
349 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cab
049
1
2
3
4
5
6
7
8
Function button of the instrument
1. Back button
2. Left button (slide to left in the groove area)
3. Ok button
4. Up button (slide up in the groove area)
5. Right button (slide to right in the groove area)
6. Down button (slide down in the groove area)
Constantly displayed information in the
information display area
When the gear is in P position, the screen will display
the picture of the vehicle, and when exiting from the
P position, it will display corresponding content
according to the ADAS signal (it will display the
vehicle and lane line when not turned on)
Trip computer interface
After unlocking the vehicle and opening the door, the
instrument panel wakes up and prompts the door open
status. After closing the door, Start/Stop the button in
the "RUN" mode, press the "OK" button on the
turning wheel, select "Trip computer" from the menu,
and press the "OK" button. The trip computer
interface includes:
Short-term memory
Long-term memory
Instantaneous fuel consumption
Battery voltage
The interface can be switched by "OK" and "Back"
button on the left side of the turning wheel.
From top to bottom, the short-term memory and long-
term memory are trip distance, trip time, average
speed and average fuel consumption. The short-term
memory automatically resets to zero after the vehicle
has been shut down for more than 2 hours.
Trip time accumulates from the moment the vehicle
is powered on after the most recent short-term/long-
term memory reset.
The average speed is calculated since the last short-
term/long-term memory reset.
Subtotal distance accumulated since the last short-
term/long-term memory reset;
Both short-term memory and long-term memory can
be reset manually by pressing and holding the "OK"
key.
Vehicle voltage: Display the vehicle voltage from 0
to 20V (for reference only).
Instantaneous fuel consumption:
Display range of instantaneous fuel consumption
during driving: 0~30.0L/100km.
Average fuel consumption:
Display the average fuel consumption of the vehicle
when it travels, the range is: 0~30.0L/100km.

Table of Contents

Related product manuals