Vehicle information interface
Select "vehicle" from the menu. The vehicle
information interface includes:
● Chassis information
● Tire pressure monitoring
The interface can be switched by "OK" and "Back"
button on the left side of the turning wheel.
Environmental information interface
Select 'Environment Information' from the menu and
press the 'OK' button. The environmental information
interface includes:
● Compass
● Gradient information, left and right: ±60°
● Gradient information, front and rear: ±40°
● Atmospheric pressure information
● Relative height information
The interface can be switched by "OK" and "Back"
button on the left side of the turning wheel.
Multimedia interface
Select "Multimedia" from the menu and press the
"OK" button. The multimedia interface includes:
● Radio
● Music
Depending on the IHU side playback, the interface
can be switched by the "OK" and "Back" button on
the left side of the turning wheel.
Navigation interface
Select "Navigation" from the menu and press the OK
button. The interface can be switched by the "OK"
and "Back" button on the left side of the turning
wheel.
Setting interface
Select "Settings" from the menu and press the OK
button. Setting interface include:
● HUD setting
● Overspeed alarm
● Alarm volume
● Maintenance
● Compass calibration
● Fuel economy prompt
The interface can be switched by "OK" and "Back"
button on the left side of the turning wheel.
Alarm query interface
Select “Alarm Query” from the menu and press the
OK button. The alarm query interface includes:
● If there is a fault, the specific fault information
will be displayed
● if there is no fault, "No fault" will be displayed
The interface can be switched by "OK" and "Back"
button on the left side of the turning wheel.
To Next Page
Loading...
