Mobile phone Bluetooth key
unlocking
The mobile phone Bluetooth key can replace the
smart key. Touching the corresponding button on the
Bluetooth key can realize the functions such as lifting
the window, unlocking the trunk, searching for the
car and starting the Bluetooth key. Carry the mobile
phone into the vehicle and manually trigger the
Bluetooth key. Within 3 minutes after the function is
triggered, press the brake pedal and press the start
switch to start the vehicle. After the function is
triggered for 3 minutes, the Bluetooth key start
function needs to be re-triggered before the vehicle
can be started.
The mobile phone Bluetooth key can be used
when the mobile phone has been certified as
follows:
1. Use the mobile phone to download and install the
Yueyequan APP.
2. Complete the vehicle owner certification
according to the mobile phone APP prompt.
3. Open the mobile phone Bluetooth and carry the
mobile phone close to the vehicle.
4. Keep the Yueyequan APP in started and switch to
the "Love Car" module until the "Bluetooth key"
mark in the interface changes to "Activated".
● Due to differences in different mobile
phones, environmental interference, and
other factors, if the system cannot determine
whether the mobile phone is in the vehicle, it
will not be able to start the engine. Adjust the
phone position or angle and try again.
● Re-authentication is required when the user
logs out of the current account and logs in
again.
● When using Bluetooth key function for the
first time, you need to verify the Bluetooth
key through the network. If there is no
network, the Bluetooth control function
cannot be used.
To Next Page
Loading...
