01 DESCRIPTION
01.01 Description of the Machine
The Pizza Roller, with two pairs of parallel rollers, has been designed to
roll out only room temperature dough for the preparation of pizzas, bread, pasta for first
courses, flat loaves and cakes and others, of various forms obtaining the thickness and
diameters required.
The machine, designed in accordance with the European regulations, has been
manufactured to protect the user from the risks connected to its use; for this reason,
the machine is equipped with special protections to avoid the risks of crushing and
entanglement, due to contact with the moving parts.
The machine has been produced with specific materials designed for contact with food
products (the parts in contact are in stainless steel) and it is run by a monophase motor.
01.02 Environmental Notes
NOISE The Machine presents a Lep.d value of less than 70 dB(A)
If positioned in areas with a noise value of more than 80 dB(A),
the employer must form and inform the operator of the risks
from exposure to the noise and must take the necessary
precautions according to the authorized doctor.
PACKAGING Do not throw away the packaging, separate it according to the
type of ma-
terial (eg. cardboard, wood, plastic material, etc.) and dispose
of them in conformity with the local and national laws in force.
DISPOSAL Operate in accordance with the local and national laws in force:
the residue
of cleaning are assimilated in urban areas.
OUT OF ORDER At the end of the Machine's working life:
• Disactivate the Machine, by disconnecting it from the electric power
supply and cutting the supply line cable.
• Disassemble the Electronic Panel.
• Disassemble the components, separating the various types and send
them to the scrapyard or dispose of them according to the local and
national laws in force.
01.03 Technical Characteristics
Refers to ALL. 1.
THE SERIES, THE VERSIONE, THE TENSION AND THE FREQUENCY
FOR USE OF THIS APPLIANCE ARE WRITTEN ON THE COVER OF THIS
MANUAL FOR USE AND MAINTENANCE
THE TYPE AND THE REGISTRATION NUMBER, STAMPED ON THE
PLATE, MUST ALWAYS BE QUOTED, EVERY TIME THAT THE
MANUFACTURER OR LOCAL RETAILER IS CONSULTED FOR
INFORMATION OR FOR ORDERING SPARE PARTS
To Next Page
Loading...