are well received or stopped manually.
7.2 Manual Time Setting:
In time display mode, hold “MODE” button (B1) for 3 seconds to enter
Clock/Calendar setting Mode.
Press “+” (B4) or “-” (B5) button to adjust the setting and press “MODE”
button (B2) to confirm each setting.
(By keeping the “+” (B4) or “-” (B5) button pressed, could accelerate the
process and reach the desired value more quickly)
The setting sequence is shown as follow: Hour, Minute, Second, Year,
Month/Day sequence, Month, Date, Weekday Language, Time Zone.
There are 8 languages for day of week: German, English, French, Italian,
Dutch, Spanish, Denmark and Russian. The languages and their selected
abbreviations for each day of the week are shown in the following table.
Note:
(1) All Setting mode will automatically exit in 15 seconds without any adjustment
(2) For Time Zone: If you receive no RC-DCF frequency signal, the time zone
should be set to 0. Time Zone is used in countries which can received the DCF
frequency signal but the time zone is different from German Time ( i.e.
GMT+1).
7.3 Daily Alarm Function:
Press “ MODE” button (B1) to select to view alarm Time, “AL” shown on the
display
When viewing the Alarm Time, hold “MODE” button (B1) for 3 seconds to
enter Alarm Time setting. Press “+” (B4) or “-” (B5) button to adjust the
alarm time. Press “MODE” button (B1) to confirm the setting.
7.4 Snooze Alarm Function:
To Next Page
Loading...