Need help?Do you have a question about the Balboa Water Group ControlMySpa GATEWAY ULTRA and is the answer not in the manual?
General| Model | ControlMySpa GATEWAY ULTRA |
|---|---|
| Category | Home Automation |
| Connectivity | Wi-Fi |
| Mobile App | ControlMySpa app |
| Compatibility | Balboa Water Group spas |
| Functionality | Remote spa control and monitoring |
| Power Requirements | 5V DC, 1A |
| Operating Temperature | 0°C to 40°C |
| Weight | 0.5 lbs |
| Control | Mobile app |
Illustrates the physical connections for the Gateway ULTRA module at home and to the spa.
Step-by-step instructions for connecting the Gateway ULTRA hardware in the home environment.
Instruction to disconnect all electrical power to the spa before proceeding with installation.
Instructions to confirm that the spa's control system is a BP Series model.
Procedure to remove the enclosure cover from the spa's BP Control System using a screwdriver.
Instructions for connecting the low voltage RS485 cable from the Gateway to the spa data bus.
Guidance on mounting the Gateway ULTRA module inside the spa, high up and away from metal components.
Instructions to firmly re-attach the enclosure cover to the BP Control System after installation.
Critical safety warnings regarding high voltage electrical work and the need for qualified electricians.
Confirmation that the user account setup is complete and the spa can now be controlled via the app.
To Next Page