Assembly Instructions
Page
1
of 3
1. Important Safeguards
Read these instrucons carefully and retain them for future use. If this product
is passed to a third party, then these instrucons must be included.
When using the product, basic safety precauons should always be followed to
reduce the risk of injury including the following:
2. Before First Use
admin@huasenjiaju.com
3. Cleaning and Maintenance
●
Clean spills immediately by using a so, clean, lint-free cloth to prevent staining.
●
Never use harsh chemicals or solvents on your product as this may damage the product.
●
Marks and stains are difficult to remove, we recommend you consult a professional.
If you use a professional product, pretest it in an inconspicuous area for any signs of
discoloraon or shrinking.
●
- these materials are
potenal source of danger, e.g. Suffocaon.
●
Check the product for transport damages. Unpack all hardware bags and components
to ensure you have all parts before assembly.
●
Assemble product on a clean non-marring surface. Remove all the packing materials.
●
●
Always use the product on a firm, level ground.
●
Do not stand on the product or use it as a step ladder.
●
Periodcally check to see that all bolts,screws and knobs are firmly screwed.
Tighten them if any are loose.
●
Stop using the product at first sign of damage or if parts become detached.
●
Keep the fire or all sharp objects away from the product.
Description:
End Table
Model No. :
HSA-5003
To Next Page
Need help?
General
