To Next PageTo Next PageWhat to do if the Ballu KFR-28GW/BP supply voltage is abnormal?
If your Ballu Air Conditioner shows an abnormal supply voltage, it's likely that the voltage is either too high or too low. To resolve this, use a stabilizer to maintain the voltage between 150V and 260V.
What to do if there is an overcurrent trouble in Ballu Air Conditioner?
If your Ballu Air Conditioner is showing an overcurrent issue, it means there's too much electric current in the outdoor unit. Check the electrical connections and make sure they have the correct current rating.
What to do if the Ballu Air Conditioner compressor overheats?
If the compressor of your Ballu Air Conditioner overheats, this might be caused by a thermistor short-circuit, an open circuit, or the compressor overheating. Allow the compressor to cool down completely before attempting to restart it.
General| Brand | Ballu |
|---|---|
| Model | KFR-28GW/BP Series |
| Category | Air Conditioner |
| Language | English |
Illustrates the refrigerant circuit for different air conditioner models.
Covers defrost, overload, anti-freezing, and other protection mechanisms.
Lists error codes, descriptions, and potential causes for specific models.
Details protection mechanisms and troubleshooting steps for common issues.
Step-by-step diagnostic guides for identifying and resolving unit malfunctions.
Detailed circuit diagrams for control, power, and IPM boards.
