IO-Link state 17
Sensor short circuit 18
Display LED 18
5.5. Startup 19
Configuration of the modules 19
Validation 20
Parameter server 20
Upload flag on the IO-Link device 21
Safe state 21
5.6. IO-Link parameterization 21
Control 21
Status 21
Example - CoE setting 22
Example - Read 22
Example - Write 23
6 Object list 24
6.1. Input Process Data (Pin 2) Ch. x (0x2000 – 0x2FFF) 24
6.2. Input Process Data (Pin 4) Ch. x (0x2000 – 0x2FFF) 24
6.3. Additional IO-Link Configuration Data (Pin 4) Ch. x (0x2000 – 0x2FFF) 24
6.4. Additional IO Configuration Data (Pin 2) Ch. x (0x2000 – 0x2FFF) 24
6.5. Display LEDs (0x2A01) 24
6.6. Module status (0x2A02) 24
6.7. Output Process Data Ch. x (0x3000 – 0x3FFF) 24
6.8. IO-Link Service Data Ch. x (0x4000 – 0x4FFF) 24
6.9. IO-Link Configuration Data Ch. x (0x8000 – 0x8FFF) 25
6.10. IO-Link Information Data Ch. x (0x9000 – 0x9FFF) 25
6.11. IO-Link Diagnosis Data Ch. x (0xA000 – 0xAFFF) 25
6.12. IO-Link Status Data Ch. x (0xF100) 25
6.13. Configuration without ESI 26
Master Control 26
Process data length 26
Example 26
7 Display 27
7.1. General 27
7.2.
Control and display
27
7.3.
Design and symbols
27
7.4.
Commissioning
27
7.5.
Main Menu
28
7.6. Network Config 28
7.7.
Module information
28
7.8.
General information
28
8 Web server 29
8.1. General 29
8.2. EoE Setup 29
8.3. Network preparation 30
8.4. Beckhoff control settings 30
8.5. EOE and PC networks 30
8.6. General 31
8.7. Navigation / Help 32
8.8. Login/Logout 33
8.9. "Home" dialog 34
8.10. "Ports" dialog 36
8.11. "IODD Management" dialog 38
8.12. "Configuration" dialog 40
8.13. "Log" dialog 41
9 Appendix 42
9.1. Included in the scope of delivery 42
9.2. Order number 42
9.3. Ordering information 42
To Next Page
Loading...
