EasyManua.ls Logo

Balluff BNI IOL-104-011-K006 - Explanation of the Warnings; Other Applicable Documents; Symbols and Conventions; Technical Terms and Abbreviations Used

Balluff BNI IOL-104-011-K006
40 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.balluff.com 5english
1.1 Validity
This guide provides all the necessary information for the
safe use of the following Balluff network interfaces:
BNI IOL-104-011-K006
Order code: BNI00J0
Read this guide and the other applicable documents
completely before installing and operating the product.
Original User’s Guide
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2022, Balluff GmbH
All contents are protected by copyright. All rights reserved,
including the right to reproduce, publish, edit and translate
this document.
1.2 Other applicable documents
Additional information about this product can be found at
www.balluff.com on the product page, e.g.in the fol-
lowing documents:
Data sheet
Declaration of Conformity
Disposal
1.3 Symbols and conventions
Individual actions are indicated by a preceding triangle.
Instruction 1
Action sequences are numbered:
1. Instruction 1
2. Instruction 2
Numbers unless otherwise indicated are decimals
(e.g.23). Hexadecimal numbers are represented with a
preceding 0x (e.g.0x12AB).
Note, tip
This symbol indicates general notes.
1.4 Explanation of the warnings
Always observe the warnings in this guide and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
Measures to avoid hazards
The individual signal words mean:
NOTICE
Identifies a danger that could damage or destroy the
product.
DANGER
The general warning symbol in conjunction with the
signal word DANGER identifies a hazard which, if not
avoided, will certainly result in death or serious injury.
1.5 Technical terms and abbreviations used
C/Q Switching and communication line
DPP Direct Parameter Page
E-Port Digital input port
EMC Electromagnetic compatibility
FE Functional earth
GND Electrical ground, 0V
IODD IO-Device-Description
IOL IO-Link
ISDU IO-Link-Parameter (Index Service Data Unit)
LSB Least Significant Bit
MSB Most Significant Bit
U
S
Sensor supply
1
User instructions for this guide
BNI IOL-104-011-K006
Network interface – Digital hub

Table of Contents

Related product manuals