Balluff BNI IOL-719-002-Z012 - Default Chapter; Table of Contents

www.balluff.com
1
Content
1 Notes for the user 3
1.1. Structure of the guide 3
1.2. Typographical Conventions 3
Enumerations 3
Actions 3
Syntax 3
Cross references 3
1.3. Symbols 3
1.4. Abbreviations 3
1.5. Differing views 3
2 Safety 4
2.1. Intended use 4
2.2. Installation and startup 4
2.3. General safety notes 4
2.4. Resistance to Aggressive Substances 4
Hazardous voltage 4
3 Getting Started 5
3.1. Connection overview 5
3.2. Mechanical connection 6
3.3. Electrical connection 6
IO-Link Interface 6
Connecting the Sensor Hub 6
Function ground 6
Module versions 6
3.4. Functionality 7
3.5. Sensor Interface 8
3.6. Input signal range 10
3.7. Data formats 10
3.8. Signed data format 11
3.9. Unsigned data format 12
3.10. Dimensioned data format 14
4 IO-Link Interface 16
4.1. IO-Link Data 16
4.2. Prozess data / Input data 17
BNI IOL-719-002-Z012 17
4.3. Process data / Output data 19
BNI IOL-719-002-Z012 19
4.4. Parameter data / Request data 20
Setting the serial number 54hex 21
Process data alignment 59hex 21
Analog mode F0hex 23
Resolution F1hex 24
Pin assignment F2hex 24
Pt100/Pt1000 mode F3hex 25
Wire break disable F4hex 25
Process data format F5hex 25
Switch point 1, F6hex Switch point 2, F7hex 26
Switch point enable F8hex 26
Thermocouple grounding F9
hex
27
4.5. Error 27
4.6. Events 27
5 Technical Data 28
5.1. Dimensions 28
5.2. Mechanical Data 28
5.3. Electrical Data 28