EasyManua.ls Logo

Balluff BOD 37M-LA01-S92 - Technical Specifications Summary; Accuracy, Range, and Resolution; Environmental and Mechanical Details

Balluff BOD 37M-LA01-S92
14 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.balluff.com
Product Output Working range
BOD 37M-LA01-S92 Voltage 200…10000mm
BOD 37M-LB01-S92 Current 200…10000mm
Accuracy
The specifications are typical values for the
BOD 37M-…-S92 at 24VDC and room temperature.
The sensor reaches its full accuracy after a minimum
switch-on time of 20minutes under constant ambient
conditions. The duration of warm-up depends on the
ambient conditions.
Accuracy (1Sigma/90%
white, XRite target)
±10mm
Repeat accuracy
(1Sigma/90% white, XRite
target)
1mm
Light type Laser red light, pulsed
Laser class according to
EN60825-1
2
Power/pulse width 1mW/4ns
Measuring range 0.2…10m (90% white)
0.2…5m (18% gray)
0.2…3m (96% black)
Wave length 658nm
Light spot size, typical 15mm at 8m
Resolution 1mm/16bits
Switching hysteresis 20mm
Ambient conditions
Ambient temperature T
a
–15…+50°C
(for cold start: ≥ –5°C)
Storage temperature
–25…+70°C
Degree of protection per
IEC60529
IP67
(Required) UL
Class2 power supply per
UL508
(Required) CDRH
Per 21 CFR1003 and
1004
Reverse polarity protection
Yes
Short-circuit protection
Yes
Max. ambient light
40000 lux
Vibration (EN60068-2-6)
0.5mm amplitude,
10…55Hz frequency per
axis
Shock resistance
(EN60068-2-27)
11ms (30G) 6 shocks
per axis
Moisture
<90%, non-condensing
Supply voltage (external)
Supply voltage 24VDC±20%
Consumption <2.8W
Output
Analog output (linearity
error ±0.03% FS
V
, ±0.03%
FS), scalable
Type BOD 37M-LA… 0.2…10V
Type BOD 37M-LB… 4…20mA
Load resistance R
L
Type BOD 37M-LA… ≥ 1200Ω
Type BOD 37M-LB… ≤ 500Ω
Response time < 30 ms
Switching output Q 1/2 Push-pull
Switchpoint Q 1/2
Adjustable 200mm…10000mm
Factory setting 500mm
Mechanical
Connection type Connector
Connector M12x1, 5-pin
Housing material GD-ZN AL4
Dielectric strength 500VAC, 1min between
electronics and housing
Insulation resistance >17MΩ, 500VDC
between electronics and
housing
Active surface material PMMA
Dimensions 60 × 62.2 × 37mm
Weight ≤250g
No. 914799 DE · K15; Subject to modification.
Technical data
4ENGLISH
BOD 37M-LA/LB01-S92
Photoelectric Sensors – Laser Distance Sensor

Related product manuals