BSG TID-05-T30-01-005
38
5 The Configuration Software
5.25. Global Writing Speed
When creating steps, you can specify a delay time in milliseconds. This time value means
that the keyboard program always waits the set time after the step has been executed.
The global writing speed inserts an additional time value. This value determines how long
the wait will be after a character is entered.
Since not all machines can process fast entry of characters, an additional value can be set
here.
The following values can be selected
• Low – 100 ms
• Middle – 50 ms
• High – 5 ms
Specifying the keyboard writing speed
• Open the Upload tab. (1)
• Click on Writing Speed. (2)
• Select the desired value. (3, 4)
• The setting is applied and sent at the next data transfer.
Figure 32: Setting the writing speed
To Next Page
Loading...