Balluff Easy Tool-ID BSG TID-05-T30-00-005 - 5.27 Data Transmission

BSG TID-05-T30-01-005
40
5 The Configuration Software
5.27. Data Transmission
Data can be sent to the hardware only if there is an active connection.
Sending data to the hardware
• Click the "Start transfer" button. (1)
• The Transfer Status window opens. (2)
• When the transfer has finished, close the window by clicking the "Finished" button (click-
ing "Cancel" cancels the data transmission). (3)
Figure 34: Sending data to the Easy Tool-ID hardware