To Next PageTo Next Page
Need help?Do you have a question about the bamar MEJ 1 08-30 and is the answer not in the manual?
General| Brand | bamar |
|---|---|
| Model | MEJ 1 08-30 |
| Category | Marine Equipment |
| Language | English |
Provides necessary information for correct and safe installation, use, and maintenance of the electric foresail furling system.
Explains the five types of graphic safety symbols used in the manual to highlight danger or information levels.
Lists essential tools for furler assembly and describes the electric foresail furling systems.
Details packaging, goods receipt procedures, and essential technical specifications for the furler.
Provides detailed technical specifications for the MEJ1 furler models, including dimensions and weights.
Explains how to identify the furler and defines its intended use, emphasizing correct operation.
Summarizes general safety guidelines for the furler system, emphasizing basic rules for operator safety and correct product use.
Guides on opening packages, checking materials, and preparing stay terminals for furler installation.
Illustrates and lists optional terminals and accessories that simplify the installation process.
Explains connecting the furler's motorization to the chain plate using a special clevis pin.
Provides a formula and example to calculate the required number and length of foils for the furler.
Details how to mark, drill, cut, and file foils according to calculated measurements.
Explains drilling foil for securing splice pieces and preparing the terminal foil with a lock ring.
Describes installing the furler on a grounded stay, including fitting splice pieces and half bearings.
Guides on fitting the terminal foil and connecting middle foils using splice pieces.
Details mounting the halyard swivel, tack adapter, and hoisting foil onto the furler system.
Describes connecting the stay to the mast head and adjusting the turnbuckle for on-board installation.
Guides on installing the motorization unit onto the link plates, ensuring correct orientation.
Details the installation process for an armed mast, emphasizing safety and proper foil assembly.
Explains mounting the halyard swinging block to ensure a proper angle between halyard and stay.
Provides guidance on making the electrical connection for the furler, emphasizing skilled personnel.
Presents wiring diagrams and recommends cable sizes for the electric furler system.
Describes the electronic overload cut-out and the optional radio control functionality.
Explains how to manually operate the furler in case of electric failure, including safety precautions.
Offers advice on sail hoisting length and halyard swivel positioning for optimal furler performance.
Details how to hoist and use the furler, including sail reefing and traveler adjustment.
Outlines basic maintenance rules for preserving furler efficiency and care for periods of inactivity.
Provides step-by-step instructions for replacing and tensioning the drive belt, with safety warnings.
Details the process for replacing the electric motor, emphasizing power disconnection and careful removal.
Advises on greasing the furler's drive gears every two years, recommending a specific grease type.
Lists common furler problems, their causes, and recommended remedies for efficient operation.
Shows exploded view diagrams for motorization and foil spare parts, with reference tables.
Details warranty terms, conditions, and essential client checks after furler installation.
