Need help?Do you have a question about the Banana Pi M1 and is the answer not in the manual?
General| GPU | Mali-400 MP2 |
|---|---|
| RAM | 1GB DDR3 |
| Video Output | HDMI, Composite |
| Audio Output | 3.5mm jack, HDMI |
| GPIO | 40-pin header |
| Power Supply | 5V/2A via micro USB |
| Dimensions | 92mm x 60mm |
| CPU | Allwinner A20 (ARM Cortex-A7 dual-core) |
| Storage | SD card slot |
| USB Ports | 1 x micro USB (OTG) |
| Ethernet | 10/100 Mbps |
Specifications for the central processing unit and graphics processing unit.
Information on RAM capacity and storage interfaces like SD and SATA.
Details on network, video, audio, USB ports, and input connectors.
Requirements for the power supply and functions of onboard buttons.
Diagram and description of the front side of the Banana Pi board.
Board size, weight, and operating temperature range.
Details the Banana Pi's 26-pin GPIO header and its pinout.
Specification of the 40-pin FPC connector for external camera modules.
Details the 40-pin FPC connector for LCD panels and touch screen modules.
Information on UART interface jumpers (J11, J12) for console output.
Pin definitions for GPIO CON3 and J12 interfaces.
Pin definitions for GPIO J11 and the general pinout.
Pin definitions for CON1 from P01 to P09.
Detailed pin definitions for CON1 from P17 to P40.
Pin definitions for CON2 from P09 to P17.
Detailed pin definitions for CON2 from P19 to P40.
Pin definitions for CON3 from P18 to P21.
Detailed pin definitions for CON3 from P19 to P26.
Pin definitions for J11 and J12 interfaces.
To Next Page
