B&K 281 - DC Current Measurement Specs; AC Current Measurement Specs

Overrange
Maximum AC Input ..
Асёйтасу И. MOORE
Frequency Response ..
Input Impedance ......
Overrange Indication
DC CURRENT
REES o o t
Voltage Drop
(Measured at
instrument terminals).
Overrange 2
Accuracy onm ...
Wrong Polarity
Indication. P ы
Overrange Indication
AC CURRENT
Rappes ыш. 2. eee
Voltage Drop
(Measured at
instrument terminals).
Отеапре й. „е-е
Сау ЕА
Frequency Response
Overrange Indication
zc
1.5
per
cent
accuracy:
20Hz
to
1000925
*
Drame
бс
gie
100
per
cent
to
199mv,
1.99Volt,
19.9Volts,
.
199Volts, 1.00Kilovolt RMS*. dat
.1000V
RMS
or
1500Volts
peak.
ka
2- 1.5 per cent of full range (Calibrated с |н».
10 megohms.
. If the input voltage exceeds 200 per cent: T full
scale,
the
first
digit
(*1")
will
remain
off
and
the
second
and
third
digits
will
blink
on
and
off
to-
gether.
*Do not exceed input level of 1000V RMS or
1500V peak.
Ф
0—100,a, 1.00ma, 10.0ma, 100ma, 1.00А.
.100ту, at full range.
100 per cent to 199,a, 1.99ma, 19.9ma, 199ma,
1.99A.
z- 1.5 per cent of full range.
If a DC current of the wrong polarity is applied
to the input, the first digit (“1”) will remain on
and the second and third digits will remain off.
. If the input current exceeds 200 per cent of full
scale, the first digit ("1") will remain off and
the second and third digits will flash on and off
together.
0—100,a, 1.00ma, 10.0ma, 100ma, 1.00A.
100mV RMS at full range.
100 per cent to 199,2, 1.99ma, 19.9ma, 199ma,
1.994.
2 1.5 per cent of full range.
...20Н? to 1000Hz.
. .If the input current exceeds 200 per cent of full
scale, the first digit (“1”) will remain off and the
second and third digits will flash on and off
together.