B&R Power Panel 500 Series User Manual

1
Power Panel 500
User's Manual
Version: 1.40 (August 2015)
Model no.: MAPP500-ENG
All information contained in this manual is current as of its creation/publication. B&R reserves the right to change
the contents of this manual without notice. The information contained herein is believed to be accurate as of
the date of publication; however, Bernecker + Rainer Industrie-Elektronik Ges.m.b.H. makes no warranty, ex-
pressed or implied, with regard to the products or documentation contained within this manual. In addition,
Bernecker + Rainer Industrie-Elektronik Ges.m.b.H. shall not be liable for any incidental or consequential damages
in connection with or arising from the furnishing, performance or use of the product(s) in this documentation. Soft-
ware names, hardware names and trademarks are registered by their respective companies.

B&R Power Panel 500 Series Specifications

General

Brand	B&R
Model	Power Panel 500 Series
Category	Industrial Equipment
Language	English

Summary

Chapter 1 General Information

Safety Guidelines

Covers intended use, ESD protection, policies, transport, storage, installation, operation, and disposal.

Overview

Lists product IDs, short descriptions, and page numbers for accessories, CPU boards, CompactFlash cards, etc.

Chapter 2 Technical Data

System Components and Configuration

Details essential components and base system configuration, including CPU boards and main memory.

Temperature Specifications

Explains temperature monitoring, sensor locations, and provides a table of maximum specified temperatures.

Device Interfaces and Slots

Provides an overview of device interfaces including COM, Ethernet, USB, CompactFlash, and SD card slots.

Chapter 3 Installation

Important Installation Information

Covers environmental conditions, enclosure installation, surface requirements, ventilation, and cable routing.

Mounting Orientations

Shows approved mounting orientations (0°, 45°, 90°, 180°) and ambient temperature derating.

Chapter 4 Software

BIOS Options

Details general BIOS information, setup, and boot procedures, including relevant keys.

OEM Features

Covers features for CPU boards, system units, I/O boards, IF boards, and memory modules within BIOS.

Chapter 6 Accessories

CompactFlash Cards

Provides general information on CompactFlash card features like flash technology, wear leveling, ECC, and SMART support.

USB Flash Drives

Covers general information, order data, technical data, and temperature/humidity diagrams for USB flash drives.

Chapter 7 Maintenance and Service

Cleaning

Provides instructions for cleaning the device, emphasizing safety precautions and suitable cleaning agents.

Replacing the Battery

Explains how to evaluate battery status and describes the procedure for replacing the lithium battery.

Appendix A

Mounting Compatibility

Describes the installation compatibility of Power Panel, Automation Panel, and Panel PC devices based on display size.

Abbreviations

Lists abbreviations used in the manual and their corresponding descriptions.