BAnff eProdigy series - Handlebar and Stem Installation Guide

)"/%-&#"345&. INSTALLATION
Apply some bicycle grease on
the stem bottom where it inserts
into the fork
Adjust stem to the
desired height, then
tighten the stem bolt
with a 6mm Allen key
WARNING
the minimum insertion mark
on the stem must be below the
top of the locknut
1
a
b
b
a
2
08 )"/%-&#"345&.*/45"--"5*0/
www.eProdigyBikes.com
Use a 6mm Allen key and bicycle grease