E-Stop Safety Modules with Adjustable Delay – Models ES-TN-14H5/-14H6
Important ... read this page before proceeding!
Banner Engineering Corp. has made every effort to provide complete application, installation, operation, and maintenance
instructions. In addition, any questions regarding the use or installation of this Banner Emergency Stop Safety Module should
be directed to the factory applications department at the telephone numbers or address shown on back cover.
The user shall ensure that all machine operators, maintenance personnel, electricians, and supervisors are thoroughly familiar
with and understand all instructions regarding the installation, maintenance, and use of this Emergency Stop Safety Module,
and with the machinery it controls.
The user and any personnel involved with the installation and use of this model Emergency Stop Safety Module must
be thoroughly familiar with all applicable ANSI/NFPA standards. The standards, listed below, directly address the use
of emergency stop systems. Banner Engineering Corp. makes no claim regarding a specific recommendation of any
organization, the accuracy or effectiveness of any information provided, or the appropriateness of the provided information
for a specific application.
The user has the responsibility to ensure that all local, state, and national laws, rules, codes, and regulations relating to the
use of this Emergency Stop Safety Module in any particular application are satisfied. Extreme care is urged that all legal
requirements have been met and that all installation and maintenance instructions contained in this manual are followed.
U. S. Standards Applicable to Use of Emergency Stop Safety Modules
ANSI B11 Standards for Machine Tools “Safety Requirements for the Construction, Care and Use”
Avail
able from: Safety Director
AMT –
The Association for Manufacturing Technology
7901
Westpark Drive
McLea
n, VA 22101-4269
Tel.:
703-893-2900
NFPA79 “Elec
trical Standard for Industrial Machinery (1997)”
Avail
able from: National Fire Protection Association
1 Bat
terymarch Park, P.O. Box 9101
Quinc
y, MA 02269-9101
Tel.:
800-344-3555
ANSI/RIA R15.06 “Safety Requirements for Industrial Robots and Robot Systems”
Avail
able from: Robotic Industries Association
900 V
ictors Way, P.O. Box 3724
Ann A
rbor, MI 48106
Tel.:
734-994-6088
European Standards Applicable to Use of Emergency Stop Safety Modules
ISO/TR 12100-1 & -2 (EN292-1 & -2) “Safety of Machinery – Basic Concepts, General Principles for Design
Part
1: Basic Terminology, Methodology, and
Part
2: Technical Principals and Specifications”
ISO 13849-1 (EN954-1) “Safe
ty of Machines: Safety Related Parts of Control Systems”
IEC/EN60204-1 “Elec
trical Equipment of Machines: Part 1: General Requirements”
Also,
request a type “C” standard for your specific machinery.
ISO 13850 (EN418) “Safe
ty of Machinery – Emergency Stop Equipment Functional Aspects, Principles for Design”
Avail
able from: Global Engineering Documents
15 In
verness Way East
Engle
wood, CO 80112-5704
Tel.:
800-854-7179
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...