These cables are antenna extension cables, connecting an N-type antenna to another N-type antenna cable.
These cables are usually used outside the enclosure.
Part No. Model No. Description
77489 BWC-4MNFN3 LMR400 N Male to N Female, 3M
77490 BWC-4MNFN6 LMR400 N Male to N Female, 6M
77821 BWC-4MNFN15 LMR400 N Male to N Female, 15M
77822 BWC-4MNFN30 LMR400 N Male to N Female, 30M
11.6.2 Ethernet Cables
Use a crossover cable to connect the DX80 GatewayPro or DX83 Ethernet Bridge to a host system without using an Ether-
net switchbox or hub. When using a switchbox or hub, use a straight cable.
Part No.
Model No. Description
77669 BWA-E2M Ethernet cable, RSCD RJ45 440, 2M
78469 BWA-E8M Ethernet cable, RSCD RJ45 440, 8M
78467 BWA-EX2M Ethernet cable, crossover, RSCD RJ45CR 440, 2M
11.6.3 Adapter Cables
Part No.
Model No. Description
81325 BWA-HW-006 Adapter cable, USB to RS-485, for use with the User Configuration Tool soft-
ware (UCT)
19970 BWA-UCT-900
(shown)
Adapter cable with power, USB to RS-485, for use with the User Configuration
Tool software (UCT), supplies power to 1 Watt radios
11.6.4 Splitter Cables
Part No.
Model No. Description
83265 CSRB-
M1250M125.47M125.73
Splitter cable, 5-pin Euro-style QD, No trunk male, two
female branches, black (shown).
Use to split power between two FlexPower or solar
powered devices. DO NOT use this cable to connect a
FlexPower devices to a 10–30V dc powered device.
SureCross DX80 and Performance DX80 Product Manual
92 www.bannerengineering.com - tel: 763-544-3164 Rev. J
To Next Page
Loading...
