Banzai 69987 - Page 6

Setup Instructions
4. Flip over the corner
with the water plug.
Open the plug and fill
up with water to the line
indicated on the sides
of the water bags.
NOTE: When filling the
water bags, do not
insert the hose into the
water valve completely.
Doing so may cause
the water bags to burst.
Use a container to
gently pour water into
the water bags. When
full, close the valve.
NOTE: It is very
important to fill both
water bags with water
before inflating the
shark tunnel with air. If
the shark tunnel is filled
with air first the water
bags will not be able to
be filled with water.
5. Inflate the product with
AIR.
NOTE: For easy air
inflation use a manual
air pump designed
specifically for plastic
inflatables.
4.
5.
BANZAI 69987 20121103 5