Banzai 69987 - Page 8

Empty
water bag
Empty
water bag
Setup Instructions
7. Insert one plastic stake
into the hole at each
corner of the slide and
push it firmly into the
ground using both
hands.
Guide stake into
ground equally with
both hands until level
with ground. Repeat at
opposite corner. Check
stakes frequently to
insure they
remain level with the
ground.
8. Attach the end of a
standard garden hose
to the hose connector.
Turn the connector to
tighten; tighten until it
cannot turn any further.
9. Do not relocate the
position of the shark
tunnel once the water
bags have filled. Doing
so may damage the
shark tunnel. When
moving or adjusting the
position of the shark
tunnel first empty the
water bags and the air
then move the shark
tunnel to the new
desired position. Then
repeat the set up
instructions from step 3
to fill the water bags
and inflate with air.
7.
BANZAI 69987 20121103 7
8.
9.