Need help?Do you have a question about the Baotian 139QMA and is the answer not in the manual?
Specifies the location of the engine serial number on the crankcase.
Details key engine specifications including starting mode, cylinder count, bore, stroke, displacement, and compression ratio.
Provides standard torque specifications (N.m) for common bolt and nut sizes used in assembly.
Lists specific torque values for critical engine components like cylinder head bolts, oil drain bolts, and others.
Illustrates and lists specialized tools required for specific maintenance procedures.
Illustrates and lists common workshop tools such as wrenches, screwdrivers, and pliers.
Diagnoses causes and provides troubleshooting methods for engine starting failures.
Addresses issues related to poor engine acceleration and sluggish performance.
Troubleshoots engine performance problems that occur at high speeds.
Identifies causes and solutions for battery overcharging or over-discharging issues.
Diagnoses ignition system faults leading to no or weak spark from the spark plug.
Troubleshoots engine issues affecting operation at low speeds and idle.
Details procedures for servicing the air intake and airfoil components.
Steps for removing, inspecting, and reinstalling the cylinder head hood.
Details on disassembling, inspecting, and adjusting cylinder head and valves.
Procedure for dismantling and inspecting the cylinder block and piston assembly.
Instructions for dismantling and inspecting the kickstarter mechanism.
Procedure for servicing the continuously variable transmission (CVT).
Information on the electric starter system, including its components and troubleshooting.
Overview of the magneto, CDI, ignition coil, and rectifier adjustor.
Procedure for servicing the magneto and related electrical components.
Details on the ignition system, circuit diagram, and maintenance precautions.
Specific maintenance data for the ignition system, including spark plug and coil resistance values.
Information on the charging and lighting system, including circuit diagrams and troubleshooting.
Procedure for dismantling and inspecting the crankcase and crankshaft assembly.
Procedure for servicing the timing chain and tensioner assembly.
Diagram and description of the engine lubrication system components.
Safety and procedural precautions for maintaining the lubrication system.
Diagnoses and solves common issues related to the engine lubrication system.
Guidelines for checking and maintaining engine oil levels and performing oil changes.
Procedure for dismantling and inspecting the rear transmission system components.
Safety guidelines and precautions for servicing and adjusting the carburetor.
Overview of the carburetor's main components, control system, and fuel supply systems.
Step-by-step guide for dismantling, cleaning, and inspecting the carburetor.
Procedure for servicing the starting primer valve and its associated components.
Instructions for adjusting engine idle speed for optimal performance and stability.
Diagnoses and resolves common carburetor issues and performance problems.
Visual guide to specialized tools required for motorcycle maintenance.
Visual guide to common tools used for general motorcycle maintenance tasks.
To Next Page
General