12. Servicing
12.3 Convergence (with extenders)
About this chapter
This chapter describes how to prepare the projector for convergence adjustment and how to adjust the convergence in case the
convergence mec hanism is equipped with ex tenders.
The adjustment procedures described in this chapter are only valid for these Light Processors which are
equipped with extended control knobs for convergence adjustment.
Overview
• Convergence controls
• Preparing for convergence adjustment
• Converging the red pattern onto the blue pattern
• Converging the green pattern onto the blue pattern
R59770091 DP-1500 06/01/2009 103
To Next Page
Loading...
