13. Removal and installation of projector covers
13.7 Open the sealed compartment
This procedure assumes that the left side cover of the projector is already removed.
Necessary tools
3 mm Allen wrench.
How to open the sealed compartment of the Light Processor Unit?
1. Release the three hexagon head cap screws as illustrated. Use for that a 3 mm Allen wrench.
Image 13-13
2. Lift up the cover plate s lightly, using the two lower lips provided, and then remove the cover plate away from the projector.
Image 13-14
130 R59770091 DP-1500 06/01/2009
To Next Page
Loading...
