13. Removal and installation of projector covers
13.14 Installation of the lamp cover
Necessary tools
7mmflat screw driver.
How to install the lamp cover of the projector?
1. Install the lam p cover of the projector doing the following:
a) B ring the lam p cover t owards its final position (A),
b) then g ently push the locking stud at the left top corner (B) into its receiver,
c) then gen tly push the lock ing stud at the left bottom corner (C) into its receiver.
B
A
C
Image 13-28
2. Secure the lamp cover by locking the two captive screws at the right side of the lamp cover.
Image 13-29
R59770091 DP-1500 06/01/2009 137
To Next Page
Loading...
