9. Starting up
9.2 Switching OFF the Prometheus
HowtoswitchOFFthePrometheus?
1. Press the standby button on the local keypad or use the Com mu n icator Touc h Panel to switch the projector from operation to
standby. A s a result the lamp turns off but the fans rem ain turning to cool down the projector.
2. Let the projector co ol down at least 5 minutes or until the speed of the fans decreases.
3. Switch OFF the projector with the power switch.
R5905963 PROMETHEUS SERIES 09/03/2015
129
To Next Page
Loading...
