Barco Eonis MDRC-2222 - Page 12

2. Installation
1. Unscrew the four fixation screws to detach the panel from the stand.
Image 2-6
2. Use 4 M4 screws to attach the panel to a VESA approved arm. Please respect the following rule to
select an appropriate screw length:
-L
min
=T+W+8mm
-L
max
=T+W+14mm
T
W
L
min
Lmax
Image 2-7
10 K5902146 (451920612622) EONIS 12/01/2018