Barco G60 - Projector Package Overview

R5910887 /00 G60 9
Main power requirements
The G60 projector operates from a nominal mono phase power net with a separate earth ground PE.
Projector Power requirements
G60-W7 AC INPUT 100-240V, 50/60Hz
G60-W8 AC INPUT 100-240V, 50/60Hz
G60-W10 AC INPUT 100-240V, 50/60Hz
The power cord required to connect the projector with the power net is delivered with the projector.
Projector weight
Do not underestimate the weight of the projector. Be sure that the pedestal or ceiling mount on which the
projector has to be installed is capable of handling five (5) times the complete load of the system.
Projector Weight (without lens)
G60-W7 17.4 kg
G60-W8 17.4 kg
G60-W10 22.7 kg
1.2 Projector package overview
Box content
This projector comes with all the items shown below. Check to make sure your package is complete. Contact
your dealer immediately if anything is missing.
Image 1-2: Projector.
1
ON OFF
21 3
54 6
87 9
Gamma Bright Cont. PIP
0
Info
Mode
Auto Input
Menu Exit
Hot Key
Shutter
(AV Mute)
Pattern
Focus Lens H
Lens V
Keystone H
Keystone V
Zoom
Enter
Image 1-3: Remote
Control with two AAA size
batteries.
Image 1-4: Power cord.
Image 1-5:
Lens ring for
standard lens.
Image 1-6:
Lens ring for
Wide-, Long-,
and Ultra-Long
zoom lens.
The product Safety Manual and Quick Start Guide are also included. Download the complete and latest
updated installation manual and user guide form the Barco website.
Introduction