12. Alignment
12.10 Contrast-Intensity
Purpose
Contrast : change the contrast of the complete output signal (main and PiP window together) of the projected image.
Intensity : change the brightness of the complete output signal (main and PiP window together) of the projected image.
How to set up
1. Press Menu to activate the menus and select Alignment → Contrast/Intensity.
Image 12-54
Main menu, alignment
Image 12-55
Alignment, contrast/intensity
2. Press ENTER to select.
Image 12-56
Contrast enhancement
3. Use the ▲ or ▼ key to select Contrast Enhancement.
Use the ◄ or ► key to change the contrast enhancement until the desired value is reached (adjustable between 0 and 5)
4. Use the ▲ or ▼ key to select Intensity.
Use the ◄ or ► key to change the intensity until the desired value is reached (adjustable between 0 and 255)
Image 12-57
Intensity
206 R5905032 HDX SERIES 01/06/2011
To Next Page
Loading...
