Barco MDSC-2224 - System Configuration and Management

5. Advanced operation
To select the 2
nd
picture position
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the 2
nd
Picture Position submenu.
4. Select one of the available 2
nd
picture positions and confirm.
5.3.8 Picture Swap
About picture swapping
To swap pictures means to exchange (swap) main and 2
nd
picture.
To swap pictures
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the Picture Swap submenu.
4. Select the desired setting and confirm.
5.4 C onfiguration menu
Overview
• Information
• Language
• Failover mode
• Extended keyboard
• OSD setting
• Recall Profile
•SaveProfile
5.4.1 Information
About information
The available information items for your display are:
• Model (commercial type identification)
• Operating Hours (backlight operation hours)
• Firmware Release (firmware ide ntification)
• Hardware Version (main board identification)
• Option SDI (SDI module identification)
• Serial Number: ANxxxxxxxxxxxx
To access information
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Information submenu.
The different information items are shown.
40
(451920611391)K5903031 MDSC-2224 21/01/2014