Barco MVGD 1318 CR/ER - Page 41

Operation
41
Extended input mode
Name Description
RBG->Y The RGB video signals from the imag-
ing board are calculated and trans-
formed into a single luminance value
according to the formula 0.3R + 0.59B +
0.11G. This single luminance signal
drives the RGB sub-pixels of the panel
equally.
GRB->Y The RGB video signals from the imag-
ing board are calculated and trans-
formed into a single luminance value
according to the formula 0.3G + 0.59R +
0.11B. This single luminance signal
drives the RGB sub-pixels of the panel
equally.
GBR->Y The RGB video signals from the imag-
ing board are calculated and trans-
formed into a single luminance value
according to the formula 0.3G + 0.59B
+ 0.11R. This single luminance signal
drives the RGB sub-pixels of the panel
equally.
BRG->Y The RGB video signals from the imag-
ing board are calculated and trans-
formed into a single luminance value
according to the formula 0.3B + 0.59R +
0.11G. This single luminance signal
drives the RGB sub-pixels of the panel
equally.
BGR->Y The RGB video signals from the imag-
ing board are calculated and trans-
formed into a single luminance value
according to the formula 0.3B + 0.59G
+ 0.11R. This single luminance signal
drives the RGB sub-pixels of the panel
equally.