Operation
30
Autosetup
The Autosetup menu is not available for digital video signals.
When do you need to use the Autosetup function?
• The first time you use the display with analog video connected.
• After connecting or selecting another analog video source (e.g.,
changing the PC resolution).
• In case you notice the image geometry or positioning is not as
desired.
Required test pattern
To obtain good results with the Autosetup functions, it is necessary to
have a good image on which to perform the functions.
E.g., a maximized Windows Explorer window would be a good image.
Name Description
Full Perform all Autosetup functions (below)
one after another
Phase Adjust the video sampling phase auto-
matically. This is necessary when you
notice vertical or horizontal banding or
noise in the image.
Geometry Adjust the image geometry automatically.
This function displays the complete active
video in the center of the screen.
If the video resolution is smaller than the
native panel resolution and no scaling is
selected (see further), it puts black bor-
ders around the active video window.
If the video resolution is larger than the
native panel resolution and no scaling is
selected, the edges of the image will be
lost.
Gain Offset Adjust the video levels (black and white)
automatically
To Next Page
Loading...
