Operation
43
OSD position
With the OSD function you can select where on the screen the OSD
menu text will appear. You can select between center position, top left,
top right, bottom left or bottom right.
Display Function
See the Glossary section for more information about display functions.
The display contains a number of factory-defined lookup tables (LUTs) to
define the display (transfer) function.
Quick OSD menu
In this submenu from the Settings menu, you can determine which
menus will appear in the Quick OSD menu.
For each available menu, you can select “On” to include it in the Quick
OSD menu, or “OFF” to exclude it.
If all possible menus are excluded, the Quick OSD will not appear on the
screen.
Name Description
None When you select None, the native display
transfer curve is selected.
Gamma CRT Select this display function in case the dis-
play is to replace a CRT display. You can
set the gamma value from 1 to 3 in the
advanced Adjustments menu.
DICOM Select a DICOM display function for most
medical viewing applications.
The DICOM function results in more visible
grayscales in the images.
User 1 (2) 2 user-definable display functions.
To Next Page
Loading...
