Introduction
16 System manual Nio 5MP
Power saving
The display is equipped with a power saving system.
When left idle for a certain time, the computer connected
to the display, will power down the display.
The power saving system can be switched on or off using
the on-screen menus.
Tilt & swivel base
The versatile tilt & swivel foot allows to use the display
for viewing portrait or landscape image resolutions.
If you change the display panel orientation, you have to
reboot the PC to adapt the image orientation to the panel
orientation.
The user can easily change the panel height and viewing
angle, allowing to use the display in the optimal viewing
conditions.
Minimum System Requirements
• Pentium II 266 MHz with 128 MB RAM (Pentium
800MHz with 256 MB RAM for cineloops)
• PCI slot with no obstructions
• PCI 2.1 and/or 2.2 Compliant
• Windows 2000 Service Pack 1 and above or
Windows XP
Features of the BarcoMed Nio display controller
• Dual Head Configuration
• 10 bit performance on LCD
• 32MB Video Memory
• Portrait or Landscape Mode
• 256 Simultaneous shades of gray
To Next Page
Loading...
