Barco NW-12 - Page 102

7. Advanced
3. Shift the left corner +300 pixels downwards.
AxisLink = ON The coordinate system used for the adjustment will coincide with the edges of the distorted image, this
will result in a quick adjustment when dealing with complex setups.
AxisLink =
OFF
The coordinate system used for the adjustment is absolute.
Y: +300
216,300
300,300
X
Y
Y
:
+
3
0
0
AxisLink [OFF]AxisLink [ON]
X
Y
X
Y
X
Y
Image 7-80
How to set AxisLink ON ?
1. Start up the Geometry Edit menu
2. The Edit mode is selected
98
R59770286 NW-12 07/09/2009