Barco NW-12 - Page 128

7. Advanced
G1
G2
R1
R2
B1
W1
0
x
y
.1 .2 .3 .4 .5 .6 .7
.1
.2
.3
.4
.5
.6
.7
.8
B2
W2
Gc
Wc
Yc
Rc
Mc
Bc
Cc
Image 7-130
The Common Color Gamut
R1 Red projector 1
R2 Red projector 2
G1 Green Projector 1
G2 Green Projector 2
B1 Blue Projector 1
B2 Blue Projector 2
W1 White Projector 1
W2 White Projector 2
Rc Red Common Color Gamut
Gc Green Common Color Gamut
Bc Blue Common Color Gamut
Cc Cyan Common Color Gamut
Mc Magenta Common Color Gamut
Yc Yellow Common Color Gamut
Wc White Common Color Gamut
The following parameters can be adjusted within DynaColor™:
• the x, y coordinates and L (Light Output) of the 6 Common Color Gamut perimeter points.
• the x, y coordinates and L (Light Output) of the White point of the Common Color Gamut.
The Dynacolor™ Interface
Following parameters are available in the Dynacolor™ Interface:
Measured Values These are the col
ors the projector displays when no color changes are made
Red x, y Coördinates for the Red point
Green x, y Coördinates for the Green point
Blue x, y Coördinates for the Blue point
White x, y Coördinates for the White point
124 R59770286 NW-12 07/09/2009