Barco R9002372 - Start up of the Adjustment Mode; Adjustment Mode

Start Up of the Adjustment Mode
R5976381.01 BARCO CINE6 31012002 __________________________________________________________________________ 5-1
GENERAL ACCESS
5 6
3 4
1 2
Enter ADJUST
Select with
or
then <ENTER>
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
Adjustment mode
All picture geometry and convergence adjustments are made while in the ADJUSTMENT MODE.
There are two possible ways to enter the ADJUSTMENT MODE :
a. Local Keypad b. RCU
a. Using the local keypad :
Press the ADJUST key. The projector displays the GENERAL ACCESS menu.
Highlight ENTER ADJUST and press ENTER to display the MAIN MENU. Press ENTER twice.
b. Using the RCU :
Press the ADJUST key.
The projector displays the MAIN MENU. Highlight SERVICE MENUS
and press ENTER twice, to display the ADJUSTMENT MODE.
While in the ADJUSTMENT MODE, the arrow keys (RCU) or the control keys (local keypad) can be used to make menu selections
and also horizontal and vertical adjustments. The ENTER and EXIT keys can be used to move forward and backwards through
the menu structure. The ADJUST key can be used to terminate the Adjustment Mode.
START UP OF THE ADJUSTMENT MODE
5
MAIN MENU
Image Control
Function Keys
Service Menus
Select with or
then <ENTER>
<EXIT> to return.
WARNING
RISK OF INCORRECT
ADJUSTMENT OF THE
PROJECTOR.
The following service menus are
reserved to, and to be performed
only by qualified personnel !
If qualified, press <ENTER> to
continue, or if not, <EXIT> to
return.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 1
Select with or
then <ENTER>
<EXIT> to return.
MAIN MENU
Image Control
Function Keys
Service Menus
Select with or
then <ENTER>
<EXIT> to return.
WARNING
RISK OF INCORRECT
ADJUSTMENT OF THE
PROJECTOR.
The following service menus are
reserved to, and to be performed
only by qualified personnel !
If qualified, press <ENTER> to
continue, or if not, <EXIT> to
return.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 1
Select with or
then <ENTER>
<EXIT> to return.