Barco R9002372 - Blanking Adjustment

Random Access Adjustment Mode
6-16 ____________________________________________________________________________ R5976381 BARCO CINE6 31012002
Blanking Adjustments
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on the screen
and to blank out unwanted information or noise.
A 0 % on the bar scale indicates no blanking.
To start up the BLANKING adjustment, use the following procedure :
Use the arrow keys to highlight BLANKING in the GEOMETRY menu and then press ENTER.
The following corrections are possible :
- Top blanking
- Bottom blanking
- Left blanking
- Right blanking
If the internal # pattern was selected, the pattern remains on the screen.
If the genlocked pattern was selected, the external source will be displayed.
Top Blanking
Left Blanking
Right Blanking
Bottom Blanking
GEOMETRY
H - PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H & V SIZE
V LINEARITY
BLANKING
Select with
<EXIT> to return
then <ENTER>
or
<EXIT> to return
then <ENTER>
or
Select with
BLANKING
TOP
BOTTOM
LEFT
RIGHT