Barco R9002372 - I2 C Diagnostics

Service Mode
R5976381.01 BARCO CINE6 31012002 __________________________________________________________________________ 7-15
I2C Diagnostics
Highlights 'I2C Diagnostics' by pushing the control arrow up or down and press
ENTER.
The I2C diagnositics menu gives an overview of the I2C failures inside the projector.
To scroll through the failure list, push the control arrow up or down.
The I2C address, IC number and module name will be given in I2C diagnostic menu.
When no errors are detected, the following message will appear on the screen :
"No errors on I2C-bus detected".
SERVICE MODE
or
<EXIT> to return
then <ENTER>
Select with
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
I2C DIAGNOSTICS
or
<EXIT> to return
then <ENTER>
Select with
Failure :
addr IC number mod. name
48H IC200 DECODER