100 Barco - RHDM-2301 - User manual
Full functionality description
Press (
)
or (
)
to confirm the new color or press (
)
to undo the restore
the previously selected color.
4.2.5.10 Color channel selection button
4.2.5.11 Monochrome adjustment button
Function Description
Color Channel Selection
Toggle between two states:
•
Normal operation
: all color channels (Red, Blue and
Green) are selected and used to display the image.
•
Selected color operation
: only the selected color
channels are used to display the image.
Signal settings toolbox appears:
•
Show all channels
: Select all color channels, indepen-
dent of the color selection done for Red, Green and Blue.
•
Channel selection
: Allows the user to select the color
channel (Red, Green or Blue) to be viewed.
•
Red
: Select the Red channel
•
Blue
: Select the Blue channel
•
Green
: Select the Green channel
The selected color channel is shown in its own color. (e.g.
the blue color channel is shown in blue)
•
Monochrome
: Displays the selected color channel in
grayscale.
Function Description
Monochrome adjustment
Toggle between full color (Y’C
b
C
r
) and monochrome
(Y’ only).
To Next Page
Loading...
