Barco RHDM-2301 - Mutual Effects of Scaling and Aspect Ratio Settings; Safe Area Marker Settings

Barco - RHDM-2301 - User manual 199
Addendum
7.6 Mutual effects of scaling and aspect ratio settings
The setting of the scaling mode limits in certain cases the setting of the aspect ratio. “H res” and “V
res” correspond to the horizontal and vertical resolution respectively.
Table 11: Mutual effects of scaling and aspect ratio settings
7.7 Safe area marker settings
The safe areas are defined in EBU Technical Recommendation R95-2000, ITU Recommendation ITU-
R BT.1379-2 and SMPTE Recommended Practice RP218-2002.
The following safe area marker settings are defined:
• For 16:9 signal formats and when the safe area markers are defined relative to the aspect ratio
markers (1920x1080, 1280x720 and Wide SD):
Table 12: Safe area markers defined for 16:9 formats and relative to ARM